Drive Shafts
 

DANA Industrial Drive Shafts Catalogue

Installation and Maintenance
tt  back to Table of contents
Safety instructions

 Our products have been developed and tested according to the latest state-of-the-art of engineering. The characteristic features of the products which are described in our information material or which we specified in writing were subjected to proper and careful inspection.

Other features are possible but they are subject to our written confirmation.

The knowledge of the various demands on our product for a particular application lies with the purchaser, and it is incumbent on him to verify the drawings and documents prepared by ourselves on the basis of the data made available by the purchaser and to examine the suitability of the product for the proposed use. The selection of shaft types and the specification of their sizes on our part shall in all cases be considered as a recommendation only.

When using and handling cardan shafts, the following safety instructions must be strictly observed to prevent damage to persons and property.
Where danger to people or material can be caused by rotating cardan shafts, a safety device has to be installed by the user and/or operator.
Observe the EC Regulations for Machinery!
Installation, assembly and maintenance work may only be carried out by qualified personnel.
The operating data of the cardan shafts, such as max. torque, speed, deflection angles, lengths etc. must never be exceeded.
If cardan shafts are in any way altered without our written consent, they are no longer covered by our warranty.


DANA cardan shafts are delivered as complete units ready for installation. The shafts are greased for operation. They are balanced and painted in accordance with the technical information sheets.

The balance state of a cardan shaft must on no account be altered. An inadmissable out-of-balance of a shaft may result in uneven running and premature wear of the joints and the bearings of the units to which the cardan shaft is connected.

In extreme cases the cardan shaft could break and shaft components could be thrown at speed from the vehicle or machine.

Danger of injury!
Provide a safety guard device!



Further safety instructions are incorporated in the relevant items.

tt  back to Table of contents
 Email : info@landmark-autoparts.com  Websites

  • ++203 4496682

  • ++203 4496683

  • ++203 4487407

  • ++203 4496690